[_Tom_]

Hi all,
i´m searching for the function "Output Port Settings" like in Megasquirt. Is there something like this in the latest Speeduino code?
I can´t found something like this in Tunerstudio.
Thanks for help.
_Tom_

[ric355]

If this is referring to which functions go on which pins (e.g. turn on a cooling fan) then the configuration will be found in the dialog relating to the function in question. So the fan pin setting is in the cooling fan control dialog for example.

If this is not what you mean, please tell us what you are trying to do and we'll tell you whether it is supported in Speeduino.

[_Tom_]

This means that free outputs can be used for additional functions.
I use it for a shift light, intercooler fan when the engine is running and the air is hot, warning light for boiling water, boost pressure not reached, etc
I race. A big red lamp over the steering wheel says everything okay or "slow down" if you still want to get to the finish.

[dazq]

Hi, we don't have the port editor type function you see in ms at this time.
You could use my gpio expansion which has that featuresee the wiki for details

[_Tom_]

Then I have to see how I can solve the problem. I don't want to install a second board for 2 outputs.