For any discussion not specifically related to your project
User avatar
By turbonetics
#44550
Hello
Does anyone know what resistor specs should be for runing bip373 in wasted spark? Defaults should be 160ohm,but it seems that car misfire somethines? Any thoughts ? :)
By LAV1000
#44558
Just feel if something gets hot, bip373 and coil.
If you trigger the BIP373 now whit 5Vdc you might try 12Vdc

please post your settings (msq) dwell might be to long.

@theonewithin Gpio Mini or dxcontroller I mean. […]

Hey all, Working perfectly now, I installed windo[…]

The voltage between negative coil terminal and gro[…]

you might have the coils not wired to ignition out[…]

Still can't find what you're looking for?