Help with building your Speeduino, installing it, getting it to run etc.
By Kyleroberthammond
#69794
Has anyone got this successfully working consistenly?
I can get it connected/working but it seems to destroy my tunerstudio tune/config after disconnected after the first time?

Any ideas would be appreicated! In theory it should work. Alternatively perhaps ill just run tunerstudio on the pi instead?
By Kyleroberthammond
#69805
Reading around a bit on fb etc. Its probably related to hardware and the pi in particular or TS on linux?
Which i suspect is not the case as people with MS products dont seem to have an issue.
I tried to use a data only cable by cutting the 5v wire. No luck.

Will try an older firmware to see if that magically fixes it.
Will try bluetooth/secondary serial (if ts recongizes the data coming in).

Otherwise i guess realdash, which sucks as it does not running well on the pi4. I do have a pi5 to try with it.

Sadly my post was deleted straight away on the MS forums. I guess they dont support speeduino for TSDash which is fair.
By darreng
#69921
Although I purchased the TS dash licence, I couldn't get it to work on an Android phone, incorrect ini files.
I set up a HC-06 or 05 for the speeduino using a mega.
Loaded up Real dash, redesigned one of their free clusters and it worked perfectly.
I miss the tuning function of TS, but love the Realdash GUI for dash design.
D

If I am understanding correctly you want the out[…]

Indeed. So then I reverse-engineered the 3 origina[…]

... — is the ultimate goal to alter code t[…]

Project progressing. Have been addressing some wi[…]

Still can't find what you're looking for?