Help with building your Speeduino, installing it, getting it to run etc.
User avatar
By jake561
#60708
So checking ignition timing with timing light on 06 MZL/Duratec 2.3L I have fuel injectors disconnected and fuel pump unplugged to avoid flooding while cranking. I'm running a 36-1 TDC is on tooth number 5 and offset is set to 310 degrees. I locked timing at 0 in TC and on timing light had the wife crank over engine while I held timing light but the light wouldn't flash. I test the light on my truck and it work as suppose too. I also visually check spark in every cylinder and all is sparking. Not sure why my light won't pick up the signal. I have tried all the trick for coil on plug timing light tricks with no result. Starting to fell over my head with this project. I know this isn't really a speeduino related question but maybe there is something in TC that I'm missing. Any Tip, Trick, input or criticism would be appreciated.

nice first of all, i read all that crap months a[…]

I rewired a few grounds and tested the TPS and rel[…]

Thanks, car runs great now !!! Going to drift even[…]

sauver moteur v8

bonsoir je m appel jean marie et j habite en Franc[…]

Still can't find what you're looking for?