Help with building your Speeduino, installing it, getting it to run etc.
By neovin
#52516
According to that tune file the injector size is set to 0.0, try setting them again
By LPG2CV
#52517
Hi there

There are mathematical operators at the top of the screen :)

save your tune first, or perhaps export the table (green arrows, also at the top of the screen) :D
By tigerstyle
#52522
LPG2CV wrote: Sun Aug 15, 2021 6:20 am
There are mathematical operators at the top of the screen :)
Nice thanks!
I had my original question a bit wrong, I want to half the required fuel and double the VE to get my low VE numbers higher :)
By neovin
#53022
Just going back through conversations.
If you are using a 0.4.3 speeduino with the pressure sensor supplied (mpx4250) your calibration is way off

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?