Help with building your Speeduino, installing it, getting it to run etc.
#50796
The dizzy itself has 4 wires going to it, a blue, a yellow, and a black going to the igniter and black/orange one going to the coil itself. Now looking in the wiring diagram would be great but the wires on my loom don't match the diagrams I've found. From what i understand the black/orange is the 12v feed because it was also connected to the injector wires.

Will this have an updated version about this featu[…]

See my earlier post . The Base Tune sets t[…]

Vr Conditioner Noise when cranking

I did the fix, but it's not work. I put my setti[…]

Perhaps some different points and pictures. Instr[…]

Still can't find what you're looking for?