Page 1 of 1

How to wire up a 4efe distributor to Speeduino?

PostPosted:Thu Jun 03, 2021 11:49 am
by Fantastika
The dizzy itself has 4 wires going to it, a blue, a yellow, and a black going to the igniter and black/orange one going to the coil itself. Now looking in the wiring diagram would be great but the wires on my loom don't match the diagrams I've found. From what i understand the black/orange is the 12v feed because it was also connected to the injector wires.

Re: How to wire up a 4efe distributor to Speeduino?

PostPosted:Sat Aug 14, 2021 2:18 pm
by DhatkiddS3v3n
Hi. What color is ur ECU? And do u still have the stock harness intact??
Also how many pins does the stock ECU have? Yota dizzys are a bit annoying and noisey