Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Help with building your Speeduino, installing it, getting it to run etc.
#50796
The dizzy itself has 4 wires going to it, a blue, a yellow, and a black going to the igniter and black/orange one going to the coil itself. Now looking in the wiring diagram would be great but the wires on my loom don't match the diagrams I've found. From what i understand the black/orange is the 12v feed because it was also connected to the injector wires.
WBO2 controller with LSU ADV

I also bought it. It does what it's supposed to. T[…]

Welcome! Read the Wiki lightly, just to get overa[…]

Couple of sites you could try for the connector: C[…]

Nissan CAS timing

Thanks for your help. Once I get everything in I a[…]

Still can't find what you're looking for?