- Sat May 08, 2021 1:30 am
#50151
Hi,
I would like your help, I'm having trouble adjusting my speeduino. My GS500 has a 500cc engine, 2 cylinders, odd fire, 180º; i'm using two TBI from a Honda CB300r, for what I 've learned injetor flow is 260cc/min, however I'm having trouble starting the engine and mainteing it on. I had to raise the warmup enrichment in 240%, even still the lambda readings are high and the functioning is irregular, not maintaining iddle speed. I modified the VE table until I obtained the iddle speed, but the values in the table are too high and the mix very poor.
Here are some pictures of my project.
What you guys think I should do?
I would like your help, I'm having trouble adjusting my speeduino. My GS500 has a 500cc engine, 2 cylinders, odd fire, 180º; i'm using two TBI from a Honda CB300r, for what I 've learned injetor flow is 260cc/min, however I'm having trouble starting the engine and mainteing it on. I had to raise the warmup enrichment in 240%, even still the lambda readings are high and the functioning is irregular, not maintaining iddle speed. I modified the VE table until I obtained the iddle speed, but the values in the table are too high and the mix very poor.
Here are some pictures of my project.
What you guys think I should do?
Attachments
In the injector port type I tried both the throttle body and port options, but no difference.
engine constant.png (259.19 KiB) Viewed 3023 times
engine constant.png (259.19 KiB) Viewed 3023 times
I know these values aren't correct but kept changing them until it maintained iddle speed, just wanted to keep the engine ruinning.
tabela VE.png (196.15 KiB) Viewed 3023 times
tabela VE.png (196.15 KiB) Viewed 3023 times
warmup enrichment.png (273.6 KiB) Viewed 3023 times