I would like your help, I'm having trouble adjusting my speeduino. My GS500 has a 500cc engine, 2 cylinders, odd fire, 180º; i'm using two TBI from a Honda CB300r, for what I 've learned injetor flow is 260cc/min, however I'm having trouble starting the engine and mainteing it on. I had to raise the warmup enrichment in 240%, even still the lambda readings are high and the functioning is irregular, not maintaining iddle speed. I modified the VE table until I obtained the iddle speed, but the values in the table are too high and the mix very poor.
Here are some pictures of my project.
What you guys think I should do?
engine constant.png (259.19 KiB) Viewed 434 times
tabela VE.png (196.15 KiB) Viewed 434 times