Help with building your Speeduino, installing it, getting it to run etc.
By kaighn80
#50135
Are there any quick and dirty (or otherwise!) cold start settings that can be added just to get near to starting first time in the cold?
User avatar
By Mr_Hypnotic
#50137
Have you had any issues with a cold start?
Make sure to have the warmed up tuning in good shape before moving on to cold start.
Otherwise, there is some good info in the forums here. Search up "cold start" and have a read. :lol:
User avatar
By PSIG
#50147
Mr_Hypnotic wrote: Fri May 07, 2021 4:14 pm Make sure to have the warmed up tuning in good shape before moving on to cold start.
This is critical to good cold start tuning. Get it running and warmed-up however you can, and tune warm. The cold start adds to the warm tune and warm start settings, so that must first be right or you will drive yourself crazy. :lol:

you could set 'skip revolutions' to 3, then it wou[…]

Hi, I am trying to assign Signed values to the x-a[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?