- Sun Apr 18, 2021 8:15 am
#49685
Hello,
I've got an output setup through the ULN2803 for 10sec timer that is really giving me problems
First I tried it with just one condition to activate when rpm was higher or equal than 500 but that turned on and off randomly for whatever reason... than I added a second condition just after 10s from power on to turn on the output... That seemed to work fine but after driving along I saw that it still cut out for a split second and turn immediately on ... what the f is going on?
Any suggestions to solve this? ,please
I've got an output setup through the ULN2803 for 10sec timer that is really giving me problems
First I tried it with just one condition to activate when rpm was higher or equal than 500 but that turned on and off randomly for whatever reason... than I added a second condition just after 10s from power on to turn on the output... That seemed to work fine but after driving along I saw that it still cut out for a split second and turn immediately on ... what the f is going on?
Any suggestions to solve this? ,please
Attachments
Untitled2.png (37.46 KiB) Viewed 4338 times