[BMW_Dutchman]

No fuel and spark detected when starting the engine. Crank sensor seems to be 0,509 ohms. Detect a signal from him. I have removed the ews and transmitter from the immobileser. So from what it could be ........ any suggestions

[NickZ]

im not 100% sure on the M44, but it should be a VR sensor? Do you have a VR Conditioner?
Do you the injection set to sequential or the ignition set to sequential?

[BMW_Dutchman]

I set injection to sequental.I am using m42 crank sensor infront of the triger wheel.I have signal from the crank sensor with one long tooth. But dont know wheather i set ATDC deegrees right 126. Another thing is do i have to change something for camshaft sensor there

[Vauhtivaunu]

Take toothlog. If you have no cam sync nothing will work.

[theonewithin]

Please read the wiki.

It seems you don't understand how Speeduino works.

You need a basic understanding oh what is required and how everything works if you want to be able to work with an aftermarket ECU.

[BMW_Dutchman]

How i can see with tunerstudio the signal from cam sensor ? Because when i am looking the composite logger when cranking i see the signal from crank sensor in blue color , the red line from sync but that green from the cam signal doesnt appear at all. And so on i dont have a spark either...

[theonewithin]

Do you have a can sensor connected that is support?

You haven't posted your tune or a log either. Both are needed to see what is happening.

Also have you read the wiki to get an understanding of what signals the ECU requires to run?

[BMW_Dutchman]

Do you have a can sensor connected that is support?

You haven't posted your tune or a log either. Both are needed to see what is happening.

Also have you read the wiki to get an understanding of what signals the ECU requires to run?

Give me mail address or messenger to post some pictures of the project , because here is a little hard to me to send to you

[pazi88]

The m44 cam trigger wheel doesn't work with speeduino. Run wasted spark/batch fire to get it running only on crank trigger first.

[BMW_Dutchman]

The m44 cam trigger wheel doesn't work with speeduino. Run wasted spark/batch fire to get it running only on crank trigger first.

I'll try... that sounds promising.