Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Help with building your Speeduino, installing it, getting it to run etc.
By theonewithin
Ok. So your setup is the problem.

Fix it.

Why bandaid around the problem.

I will say this. No one else has reported what you are experiencing.

I wonder what other problems you have in your setup?
By JoostXT
Well I don't think the setup is necessarily the problem, I think it's just experiencing a physical phenomenon which other EFI systems can compensate for. What do you suggest I should change to 'fix it'? I have changed VR polarity and trigger edge but the current settings seem the best. I also replaced most parts of the ignition system which lowered the latency to about 5deg@4k rpm.

I also wonder what other problem I have, that's the goal of this topic, to get help in finding the issues, so if you have anything to add/suggest please do.
2CV 602 flat twin

Is it the 123 with the MAP feature? What engine ma[…]

PCB for Electromotive Tec3r

What do you think about this BM2LC120FJ-C for re[…]

I did this on a 92 miata with a vvt engine as well[…]

Unfortunately this probably won't work. The MX5 […]

Still can't find what you're looking for?