Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Help with building your Speeduino, installing it, getting it to run etc.
User avatar
By jonbill
#45152
theonewithin wrote:
Tue Sep 01, 2020 10:46 am
Wait....

506?

In the trigger angle?

It is actually -360 up to 360.
Yes, that was a wild goose chase :D . my trigger angle is 146. I'm at a loss for why it works with wasted COP but not sequential. Maybe it just doesn't work with the decoder setup I'm using.
User avatar
By jonbill
#45158
theonewithin wrote:
Tue Sep 01, 2020 11:46 am
Your actual trigger angle may be 360 degrees out. So instead of 146 it may actually be -214

Give that a go.
Yes! that did it. First mistake was not thinking about 720 degree cycle at all, and 2nd mistake was not noticing 720 degrees is -360 to +360, not 0 to 720.

Thanks for your help.

Ортопедические и анатомические матрасы Слип Энд Фл[…]

0.4.4c ignition channel failure (?)

There won't be anything wrong with the 0.4 setting[…]

Popped Cap C16

Hi all, First time post, apologies it’s alr[…]

VVT Driver/Control Circuit

I have a MX-5 PNP (NA6) & am looking to ad[…]

Still can't find what you're looking for?