- Sun Feb 02, 2020 1:00 pm
#40699
You can run with just a VR. It's not an issue. The Speedy can't see any difference between a Hall or a conditioned VR signal. Both produce a square waveform.
It will be a couple of issues.
1. Conditioner is dead.
2. Jumpers wrong.
3. VR sensor faulty.
4. Mega faulty.
5. Incorrect setup of Speedy (post your tune and a copy of log while cranking).
6. Wiring issues so signal doesn't get to Speedy
7. Faulty PCB soldering/components etc.
It will be a couple of issues.
1. Conditioner is dead.
2. Jumpers wrong.
3. VR sensor faulty.
4. Mega faulty.
5. Incorrect setup of Speedy (post your tune and a copy of log while cranking).
6. Wiring issues so signal doesn't get to Speedy
7. Faulty PCB soldering/components etc.