Help with building your Speeduino, installing it, getting it to run etc.
User avatar
By KevinBrock
#49825
You can also heat treat printed parts to increase their thermal tolerance. If you pack them in salt and stick them in the oven at 220 degrees F for 30-60 minutes, it helps increase their thermal tolerance. Although the temps and bake times are going to vary depending on the material.

Jaden
User avatar
By detonation
#51310
Made some endcaps for the Hammond Case 1455n1202 . Tested on DetonatiomEMS 1.1 - 1.3 boards. Arduino Placement is almost the same as Speeduino 0.4x so it should work fine for that too.

Please excuse my terrible prints. I test print this stuff with a 0.8mm nozzle at high speed just for testing.
Recommend PETG or ABS only.
Attachments
PXL_20210623_025410549.jpg
PXL_20210623_025410549.jpg (2.51 MiB) Viewed 3588 times
PXL_20210623_025305986.jpg
PXL_20210623_025305986.jpg (1.59 MiB) Viewed 3588 times
PXL_20210623_025259066.jpg
PXL_20210623_025259066.jpg (2.1 MiB) Viewed 3588 times
PXL_20210623_025253253.jpg
PXL_20210623_025253253.jpg (2.45 MiB) Viewed 3588 times
(41.97 KiB) Downloaded 147 times
By James Ferris
#52307
Do Prusa 3D printer works great for a large-scale business? I am trying to get one for my eBay and ETSY business. I checked some 3D printers at printer deets and am interested to get one by next week.

I appreciate your time.

Cheers
James
User avatar
By detonation
#53169
pkagiantas wrote: Wed Sep 08, 2021 2:13 pm
pkagiantas wrote: Wed Sep 08, 2021 2:13 pm resin parts will work fine ( probably ) im still printing them so havent tried them yet...
but here they are
i could t find barb fittings here locally so i made some


NXP mpxh series barb adapter
https://www.thingiverse.com/thing:4960359

fitting with threads for cases
https://www.thingiverse.com/thing:4960352
Amazing Thank you!!
  • 1
  • 5
  • 6
  • 7
  • 8
  • 9

you could set 'skip revolutions' to 3, then it wou[…]

Hi, I am trying to assign Signed values to the x-a[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?