Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Help with building your Speeduino, installing it, getting it to run etc.
By subzero
#43655
Today do some cable work to fit properly
The idle tube plus original air filter.plus i paink empty k jetronic housing plus builded a blanking plate
Attachments
IMG_20200613_134140.jpg
IMG_20200613_134140.jpg (5.69 MiB) Viewed 332 times
By subzero
#43659
More pron
IMG_20200613_210359.jpg
IMG_20200613_210359.jpg (5.03 MiB) Viewed 324 times
IMG_20200613_210351.jpg
IMG_20200613_210351.jpg (6.31 MiB) Viewed 324 times
Attachments
IMG_20200613_203937.jpg
IMG_20200613_203937.jpg (5.59 MiB) Viewed 324 times
By subzero
#43667
Hardware is finished.putbin and stock air filter.the only think fan outpout is s1 or s2 on 3.7 motherboard? I want to connect 2 electric fans on relay and use 2 thermal profiles 1 on speeduino and one stock mercedes fan.
IMG_20200614_164935.jpg
IMG_20200614_164935.jpg (7.06 MiB) Viewed 285 times
IMG_20200614_164955.jpg
IMG_20200614_164955.jpg (5.09 MiB) Viewed 285 times
  • 1
  • 3
  • 4
  • 5
  • 6
  • 7

Yes, 12v was connected, and even with wrong formul[…]

Thank you very much, between today or tomorrow I w[…]

I'm not an expert, but do understand the principle[…]

PCB for BMW m42/m50/m60 engine

;) Have you same information for deka 875cc ? :)

Still can't find what you're looking for?