Any questions you have before you begin buying, building and installing.
By Laudper
#70390
Hi everyone,

After a failed install of a legacy Megasquirt 1, I am looking at a new Speeduino unit and seeking advice and any considerations before taking the plunge.

The engine is a Subaru EJ25D DOHC which I have put a 36 tooth wheel on (and so planning to run 36-2-2-2). The ignition is a separate ignitor/dual coil pack setup. It runs wasted spark.

Any thoughts on which ECU would suit?
By cyrille
#70508
Hello,
I had been driving for several years with a speeduino 0.4.4.c on a subaru wrx ej20g (wheel 6/7) with great success.
good luck with your project
RPM spikes

Thank you both so much, it's working well enough t[…]

Subaru EJ25 DOHC

Ensure you turn off the hardware test when crankin[…]

The only part of this project that I've done enoug[…]

Idle advance control

Generally timing will be added (positive values) i[…]

Still can't find what you're looking for?