Any questions you have before you begin buying, building and installing.
By Mauro Cabello
#68299
Im doing a fuel only project on a CG 150cc engine I need the fuel pump but I cant find something that would work for me. I need a In line fuel pump for a 125cc injector that works around 40 PSI.
By BroKingScooters
#68622
I just picked one off amazon with the lowest fuel flow. It is a little bigger than I want. but 35 bucks, external regulator for 20. Again, they are way big, but a good start till a suitable alternate can be sourced from aliexpress.
Attachments
20240615_194353.jpg
20240615_194353.jpg (2.43 MiB) Viewed 4611 times
20240614_144250.jpg
20240614_144250.jpg (2.44 MiB) Viewed 4611 times
User avatar
By PSIG
#68623
I have used an inlet adapter fitting to convert an in-tank pump to inline pump. Search for a "30mm fuel pump" or "scooter fuel pump" to see what you can find to work with? Measure and search sites like McMaster.com or fuelpumps.com for some example fittings. Good luck!
User avatar
By digmorepaka
#68626
I can recommend the Suzuki 15100-03H11(or rather the 20$ clone on aliexpress). 35L/h, capable of ~4.5bar. I think that's the one that PSIG is talking about as well.
First start Jaguar V12 preHE

This is first time the engine did run so long that[…]

Some handy fuel line materials available in rolls […]

I assume you have a sensor heat-soak issue, and wa[…]

Bmw k100

Thanks for the reply! I've been puzzled but now I […]

Still can't find what you're looking for?