Any questions you have before you begin buying, building and installing.
By Paul Barrett
#61260
I have bought a UA4C Sea Fox (assembled kit form) with the mega. The problem I have is the mega will not fit on the UA4C board as the power socket on the Mega fouls the 22 pin socket on the UA4C board. The USB socket fits nicely between the (2) 22 pin sockets. Is this a common problem or does it involve removing the power socket from the Mega.
Picture to show.
Paul
Attachments
Mega.png
Mega.png (46.69 KiB) Viewed 551 times
User avatar
By PSIG
#61262
Correct. De-solder and remove the unnecessary power jack. Hmm… I thought he had that in his instructions. :? I've seen the power jack removal somewhere.
Running a k24a2 w/o a chassis

Good point! I guess for starters, is there a trigg[…]

Have you tried Missing Tooth (crank) as a 2-1 wh[…]

BMW E23 M30B28

The issue got worse recently. From the logs I can […]

Cool. 8-) Yes, it's actually simple to do basic[…]

Still can't find what you're looking for?