Any questions you have before you begin buying, building and installing.
By BasilF
#58699
I.ve got the sensor shown on a pair of Honda CBR500R Throttle bodies.
TPS1.jpg
TPS1.jpg (3.88 MiB) Viewed 1023 times
TPS2.jpg
TPS2.jpg (3.66 MiB) Viewed 1023 times
Does anyone know where I can get a 5 pin connector for this without buying a Honda loom?

Also I'm trying to work out the pins. I've seen viewtopic.php?f=18&t=1455&p=21709&hilit ... tps#p21709 so I'm pretty sure there is a 5v serving the TPS and MAP, an earth serving all three and outputs from all three giving 5 pins. I can probably work it out but the common 5v complicates things a bit so if anyone has the data it would be a great help.

Will this have an updated version about this featu[…]

See my earlier post . The Base Tune sets t[…]

Vr Conditioner Noise when cranking

I did the fix, but it's not work. I put my setti[…]

Perhaps some different points and pictures. Instr[…]

Still can't find what you're looking for?