[BasilF]

I.ve got the sensor shown on a pair of Honda CBR500R Throttle bodies.

TPS1.jpg (3.88 MiB) Viewed 1035 times

TPS2.jpg (3.66 MiB) Viewed 1035 times

Does anyone know where I can get a 5 pin connector for this without buying a Honda loom?

Also I'm trying to work out the pins. I've seen viewtopic.php?f=18&t=1455&p=21709&hilit ... tps#p21709 so I'm pretty sure there is a 5v serving the TPS and MAP, an earth serving all three and outputs from all three giving 5 pins. I can probably work it out but the common 5v complicates things a bit so if anyone has the data it would be a great help.

[PeterJones]

Couple of sites you could try for the connector:
Cycleterminal.com
Danstengineering.co.uk

[BasilF]

Got this mostly sorted now.

Keihin TPS.pdf

(67.15 KiB) Downloaded 61 times

20221001_134346[1].jpg (2.8 MiB) Viewed 866 times

keihin_tps.docx

(43.24 KiB) Downloaded 67 times

Hope this is a help to someone.

Another query. If the above sensor has MAP, why is there also a manifold pressure pipe on the throttle bodies?

[LPG2CV]

if it's all the throttle bodies, then that may be to balance them.