- Tue Jun 28, 2022 5:38 pm
#57562
Yes I do have the enclosure, and the regulator is built into that.
I tested the pump with the enclosure and a capped off hose, it ran for a few seconds then started flowing out the top of the enclosure back down into the tank.
I'm sure the CBF one will be the same but in an external enclosure.
I am hoping that the majority of Honda 125 engines share the same bottom end and its common with the LIfan. Grom parts are quite expensive but for example this flywheel looks a lot like a grom flywheel but is only £13.
https://www.ebay.co.uk/itm/175325625243
I tested the pump with the enclosure and a capped off hose, it ran for a few seconds then started flowing out the top of the enclosure back down into the tank.
I'm sure the CBF one will be the same but in an external enclosure.
I am hoping that the majority of Honda 125 engines share the same bottom end and its common with the LIfan. Grom parts are quite expensive but for example this flywheel looks a lot like a grom flywheel but is only £13.
https://www.ebay.co.uk/itm/175325625243