Any questions you have before you begin buying, building and installing.
#56981
Hello.

I have a 1996 pre obd c230 kompressor, it is tuned and running lean.
Have some major flat spots and not getting full power.
no one can tune it, so i want to go stand alone on just the engine.
i want to keep the original cluster, abs and airbag.

All this ecu need is Crank, cam, tps, map, inj, spark, intake temp, water temp and map?

Im thinking this will be sort of a hybrid, the original MAF sensor and tps (for bypass valve), coolant and crank (for temp and rpm in cluster) will be kept as is. And the speeduino ecu will control fuel and ignition.

This car doesnt have a check engine light or anything, so should be fine.

any suggestions?

Will this have an updated version about this featu[…]

See my earlier post . The Base Tune sets t[…]

Vr Conditioner Noise when cranking

I did the fix, but it's not work. I put my setti[…]

Perhaps some different points and pictures. Instr[…]

Still can't find what you're looking for?