Any questions you have before you begin buying, building and installing.
By roger.rrgt
#51551
First timer here in this forum and speedy! Im assemblying the 4.3c board and the kit i bought came with a 1n4734A for the D16 instead of 1N5919BG and the D15 and D17 are 1n5819, instead of the 1n5818. Looking at their datasheets, they are similar, but the zener diode has a difference of 2W between them, as the 5919 is 3w and is at the power supply, so maybe the 1w i have in hand will pop. Question is, are they fine?

Will this have an updated version about this featu[…]

See my earlier post . The Base Tune sets t[…]

Vr Conditioner Noise when cranking

I did the fix, but it's not work. I put my setti[…]

Perhaps some different points and pictures. Instr[…]

Still can't find what you're looking for?