Any questions you have before you begin buying, building and installing.
#50115
I have 8 ls style smart coils to be wired wasted spark on 4 channels I assume and 4 injectors mounted in the throttle body to be fired simultaneously. In tuner studio for engine constants how should the injector layout be configured for my blown sbc 408 with 8lbs? Also how many squirts per cycle? Thanks and cheers
User avatar
By PSIG
#50146
+1, paired. Roots blower? 1-squirt will certainly run the engine, and quite well. For best (even) fuel distribution I would begin with 2 squirts per-cycle. The blower does a good job of being a blender ;), so more squirts should not be necessary, but you can test for actual results of more squirts/cycle once up and running well on 1 or 2.

If it wasn't roots-blown (CSC or turbo with TB hat, etc), I'd say to wire injectors singly on 4 channels and 2 squirts (8 separate injections) for obvious reasons. Have fun! 8-)

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?