[edce]

@dazq; no problem, one extra magnet and Hall sensor it will be. I am willing to send pics for those who are ineteresed to install the same, but only via PM.

[LPGo]

Hi Edce, there are several ways as I told you before to let the ecu know in which cicle the crankshaft is.

Electronic way. You can measure the pressure in the inlet channel by 2 mapsensors and you can figure out that way which cilinder fires next. But you need to programm that yourself.

Mechanical:
Delete one of the 2 magnets of the camshaft.
Put a hall sensor in the hole of the petrol pump.
Put a hall sensor through the valvecover and aim it at the valves.

You see there are several ways to take a cam signal..