- Tue Feb 16, 2021 8:40 pm
#48389
Hi Edce, there are several ways as I told you before to let the ecu know in which cicle the crankshaft is.
Electronic way. You can measure the pressure in the inlet channel by 2 mapsensors and you can figure out that way which cilinder fires next. But you need to programm that yourself.
Mechanical:
Delete one of the 2 magnets of the camshaft.
Put a hall sensor in the hole of the petrol pump.
Put a hall sensor through the valvecover and aim it at the valves.
You see there are several ways to take a cam signal..