Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Any questions you have before you begin buying, building and installing.
By SpeedyGonzalez
Hey all,
I just finished building my board but am a bit lost on what I need to do to flash the Teensy with the firmware. I have all my pins mapped, but don't know where exactly I'm supposed to add it in the firmware. Are there any other changes I need to make to the firmware before I flash. I've tried to follow the guides but am still a bit lost. Anyone know what I need to do?
Problem with fuel pump outlet

Did you mean pin 37! Thats pwm idle. If you int[…]

Dyno mode

Thats how it worked wen i worked with it in the OE[…]

LED's 5,6,7,8 on all the time

You need to calibrate the sensors. Else how with […]

Modified 3 cylinder

You could reassign the pins to unused pins.

Still can't find what you're looking for?