Any questions you have before you begin buying, building and installing.
By Bougor
#43832
Hi,
Does anyone know the specs or where I can get specs from for these injectors?
Delphi 28203962


Thanks in addvance
Nigel
Attachments
20200621_140008.jpg
20200621_140008.jpg (603.96 KiB) Viewed 4087 times
By Bougor
#43834
Thanks for the reply Eric.
It's off a Hyosung GT250. I'm hoping it's large enough for a '69 BSA Rocket Three (now 830cc).
By Bougor
#43859
Yes, three injectors will be used. I'm guessing about 65 to 79 hp @ 7500 at the crank. Don't know what the GT250 puts out.
User avatar
By JochemsTR
#43869
Bougor wrote:Don't know what the GT250 puts out.
But did you check output ml/min and Duty cycle of the injectors?
3 Injectors upto 80 hp and a dc of 0,80 you need about 160 cc/min. Playing with dc will give you some reserve.
Jochem
By Bougor
#43879
Thanks for the input.
I guess I'll have to set up a test rig and see how much they deliver.
Typo from previous post, should have been 65-70hp @ 7500

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?