Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Any questions you have before you begin buying, building and installing.
By sixtyhawk472
#49460
Hello all! :D

Started a new bike project and been working out the electrical system the last couple of weeks. I have all the lights and starter motor connections in use with a Motogadget m.unit blue. My issue now is the stock Ignition Control Module. It is a Transistor Controlled Ignition System. Uses a pulse generator to sense TDC. Each cylinder has two spark plugs and uses a dual spark plug coil each. Is there anyone here that can help me turn my ugly stock ICM into a tunable tiny 12v powered ignition system? Thank you for the read and support if you can manage it. :mrgreen:
ULN2803 output random cutout

I wouldn't be surprised if this issue is fixed n[…]

Hello friends. I assembled my SCG-ECU 1.0 board. I[…]

Don't know does this matter for crank but this loo[…]

So i ordered 5pcs of bl49sp to test on. I was abou[…]

Still can't find what you're looking for?