Anything not specifically related to the Speeduino hardware. Eg sensors, bluetooth, displays etc
User avatar
By PSIG
#60205
Hello all! I can't find a good match for this 2P connector on a Pierburg fuel pump assembly. I know it should be easy. :x It appears nearly identical to a Bosch injector connector, but larger. Like a TE/AMP Junior Power Timer or certain Jetronic or Packard connectors — but larger. Perhpas a TE Std Timer, but I can find any. The terminal blades are about 6mm (0.25"), and the male housing measures about 23.6mm (0.93") wide (except lock tabs). Any good eyes out there? Ask any info you need. Thanks!
Pierburg_connector_1.jpg
Pierburg_connector_1.jpg (92.14 KiB) Viewed 5110 times
Pierburg_connector_2.jpg
Pierburg_connector_2.jpg (85.74 KiB) Viewed 5110 times
User avatar
By PSIG
#60217
Still leaning toward TE's Standard Power Timer, (SP Timer or SPT), but cannot find any to verify or buy - especially the wire terminals (contacts). Anyone have a US source, or any source at this point? Looking at the
• 881632-1 or 444075-1 for connector housing, and
• 927833-1 or 927833-2 for wire terminals as best-bets so far.
Thanks!

*PS, my VPN (required at work) is suddenly being blocked by a lot of sites, so my searching is crippled to an unknown extent. :(
User avatar
By PSIG
#60223
Awesome! I'm waiting to see if they unblock my VPN so I can try here. If not or no other option, I'll PM you, and thanks for the offer! :mrgreen:

If you look at cars that have superchargers with c[…]

blitzbox

I'm probably missing a fundamental understanding h[…]

On a pitbike engine I was able to use the pickup c[…]

AE below 1000RPM

The problem mainly is that the MAP value update[…]

Still can't find what you're looking for?