- Mon Mar 07, 2022 5:45 pm
#55768
Hello all,
I know there is a ton of info about using Ford TFI with Speeduino but my question is about connecting it to Dropbear. I read that the Crank input with the hall effect jumpers set is 12v tolerant. Does that mean I can connect the PIP signal directly to the Dropbear or will I still need to lower the voltage somehow? This is going on a 94 Mustang with a 5.0 in it.
I know there is a ton of info about using Ford TFI with Speeduino but my question is about connecting it to Dropbear. I read that the Crank input with the hall effect jumpers set is 12v tolerant. Does that mean I can connect the PIP signal directly to the Dropbear or will I still need to lower the voltage somehow? This is going on a 94 Mustang with a 5.0 in it.