Anything not specifically related to the Speeduino hardware. Eg sensors, bluetooth, displays etc
#44322
Hi David, thanks for the response

The reason I asked if i could also reverse the circuit is partialy due to my lack of knowledge (and slight fear i guess)of electronics, but after looking at it a bit more i realised its not that complicated.
at first i also didnt completely realise how it worked and why its ground based.
so i ordered a TIP 122 mosfet and a few 1k resistors. Im just gonna try to do it the regular way.

I already have a relay with a coil resistance of 85ohm and when opening it up it doesnt seem to have a resistor or diode inside which is good if i understand it correctly.

Il let you know if it all works out :)

-Gary

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?