- Thu Oct 08, 2020 1:07 pm
#45727
Hi
-U14 : not needed to go through ESD protection for MAP2_5 signal, because MAP sensor is an internal device into the ECU. Replace with Knock_5 signal and delete U15.
-ESD diodes for CAN Bus must be as close as possible to the J1 pins!
-U14 : not needed to go through ESD protection for MAP2_5 signal, because MAP sensor is an internal device into the ECU. Replace with Knock_5 signal and delete U15.
-ESD diodes for CAN Bus must be as close as possible to the J1 pins!
GITHUB about my Custom Speeduino ECU: https://github.com/FRAMSPEEDUINO/CUSTOM_SPEEDUINO_ECU