[Hasse.69]

Any progress on this one?
It's realy interesting.

[Dagaz_Psi]

Yeah it works, have two cars running on it at the moment.
The two problems i have had is that the main relay wont get activaited the way I tought, so i hade to move it to the ac on pin and use a 2n2222 and a 7.5k ohm resistor to 12v.
The other is that I get power the backway from were I put the extra injector outputs. Because there are diffrent versions of the harnesses depening on model and years.
But the ecu connector is realy easy to depin and repin.

[Hasse.69]

Would it be possible to buy PCB,s from you to SPEEDUINO my 944FTT?

[Dagaz_Psi]

Yeah should not be a problem contact me on facebook. Dagaz Gabrielsson

[Dagaz_Psi]

Some updates on the project.
Have redesigned the pcb for the fuelbox to make it more PNP, when I get the new boards and test them out I will post the easyeda link here.
Im in the midle of redesing the ignitonbox pcb, with better voltage protection, filtering and a op amp connected to the knocksensor and a headphone jack.
Is there any way to logg the sound in tunerstudio or sync up logged sound with runerstudio?

[MyWheelIsSquare]

Did you ever get a bulkhead pressure fitting? If not, have you considered aquarium stores?

[Dagaz_Psi]

Nope when I remade the pcb I used smd pressure sensors and mercedes vacumlines instead.