Page 23 of 23

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN - Open Source

PostPosted:Tue Dec 01, 2020 4:32 pm
by subzero
help my voltage sensor floats like crazy beetween 2 to 5 volts regardless the input voltage.
when im going to test outpouts with hardware test from speeduino injecor chaneli have led on 2 3 injector and hc 1 2
i need to changhe pin on speeduino compiles.choosed dvjcodec ecuteen b please helppp

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN - Open Source

PostPosted:Wed Dec 02, 2020 2:06 pm
by subzero
FIXED up and running/ used may firmware and changed pin definition
august firmware no fire on ignition 1 and 2
graet board dude awaiting for aliexpress enclosure

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN - Open Source

PostPosted:Mon Dec 14, 2020 1:42 pm
by subzero
fixed define can bus pins default used 29 30
defined pin3 ,4 n init.ino

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN - Open Source

PostPosted:Tue Dec 22, 2020 8:55 am
by subzero
//Note: This must come after the call to setPinMapping() or else pins 29 and 30 will become unusable as outputs. Workaround for: https://github.com/tonton81/FlexCAN_T4/issues/14
#if defined(CORE_TEENSY35)
Can0.setRX(3);
Can0.setTX(4);
#endif

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN - Open Source

PostPosted:Wed Dec 23, 2020 10:52 am
by dazq
subzero wrote: ā†‘
Tue Dec 22, 2020 8:55 am
//Note: This must come after the call to setPinMapping() or else pins 29 and 30 will become unusable as outputs. Workaround for: https://github.com/tonton81/FlexCAN_T4/issues/14
#if defined(CORE_TEENSY35)
Can0.setRX(3);
Can0.setTX(4);
#endif
We are aware of this issue as it was submitted by one of OUR members (@ben , on slack)

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN - Open Source

PostPosted:Tue Feb 09, 2021 8:14 am
by sagiasGEORGIOS
/Note: This must come after the call to setPinMapping() or else pins 29 and 30 will become unusable as outputs. Workaround for: https://github.com/tonton81/FlexCAN_T4/issues/14
#if defined(CORE_TEENSY35)
Can0.setRX();
Can0.setTX();
#endif
when uy compile like this ,can pins reset to pins 3 , 4 and all works flawessly,another think with speeduino 3.7 and 440cc injectors all works ok with scg ecu with same settings afr is 9.6 rich and dead times goes from 1.2 to 0.8 ? strange

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN - Open Source

PostPosted:Sun Apr 18, 2021 5:55 am
by Kennezer
dvjcodec wrote: ā†‘
Tue Jun 30, 2020 3:58 pm
jgreat, I can sell assembled ECU, but U can build yourself. If U don't have skills with electronic assemblt, contact me PM and we can make deal.
Iā€™d be interested in an assembled board.

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN - Open Source

PostPosted:Thu Apr 22, 2021 7:48 pm
by yusufbekil
Hello friends.
I assembled my SCG-ECU 1.0 board. I also made arrangements related to the software. My tests are running smoothly in TunerStudio program. But in the 202103 version, 2.4 volts are continuously coming from the 31 pin of my Teensy 3.5 board to IGN3. This problem does not happen in the 20208 version, but 2.4 volts is coming to IGN3. Anyone have a suggestion for this?
Inkedign3_LI.jpg
Inkedign3_LI.jpg (3.23 MiB) Viewed 468 times