Page 21 of 22

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN etc.

PostPosted:Sun Jan 19, 2020 7:59 pm
by dvjcodec

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN etc.

PostPosted:Mon Mar 02, 2020 2:06 am
by crazyafrican
What's the status of the firmware for 8 cylinder sequential? Is it usable yet? I have a v8 that could use this :)

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN etc.

PostPosted:Tue Apr 14, 2020 10:50 pm
by porelmundo
Can you share the SCG KiCad project files? I would like to test this design. Thank you

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN etc.

PostPosted:Wed Apr 15, 2020 1:55 pm
by Mr_Hypnotic
porelmundo wrote:
Tue Apr 14, 2020 10:50 pm
Can you share the SCG KiCad project files? I would like to test this design. Thank you
I think what you seek is here:
https://github.com/dvjcodec/ECU_Teen_3.5_rev.B

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN etc.

PostPosted:Sat Apr 18, 2020 12:09 am
by porelmundo
Thank you, what i need is to create a pick and place file for manufacturing, that is not there.
Thank you anyway

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN etc.

PostPosted:Fri May 22, 2020 12:54 pm
by Holden202T
I tried to download the gerbers linked on the top of page 21 but the file i get says its not a valid rar file and nothing in it ?

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN etc.

PostPosted:Mon May 25, 2020 6:05 am
by dvjcodec
Happy, happy day :) Eagle sources (brd and sch) for SCG-ECU 1.0 and STM32 to Teensy adapter published in my Github.

https://github.com/dvjcodec/SCG-ECU-1.0

I hope, Speeduino will support this board official in firmware, 8 outs.

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN - Open Source

PostPosted:Mon May 25, 2020 10:51 am
by Holden202T
is it just me or are other people getting error saying its not a valid archive file ?

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN - Open Source

PostPosted:Mon May 25, 2020 9:54 pm
by Holden202T
it was just me, i must have had a too old of a version of zip/rar once i got the latest i was able to open them!

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN - Open Source

PostPosted:Tue May 26, 2020 3:20 pm
by subzero
ordered pccc fot ecuteen 3.5 A
how tomopen bom