For discussion of Speeduino compatible boards designed / built by other members of the forum and for guidance around making such a board
By dazq
#24646
Looking great , but one thing...
You have used the one of the canbus pins hc2?
Either leave them clear to the expansion or ideally make provisions for the can transciever ( a very small circuit I'm sure you could squeeze in) . More people are asking about can now and the teensy has a lot of canbus support already in the current firmware :-)
By dazq
#24703
Re my last reply, but you still have pin 4 for can in use, but now for injector1!
By dazq
#24725
Cool looking good!
As you have the space would you consider either a header for the transceiver module or maybe put the parts on the board itself. I use these with the teensy as they are tested with the can library. :-)
https://m.ebay.com/itm/SN65HVD230-CAN-B ... nav=SEARCH
  • 1
  • 2
  • 3
  • 4
  • 5
  • 25

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?