Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any add-on boards such as VR conditioners, optos and OEM interface boards
By romP44
#45939
Trigger filter - A time based software filter that will ignore crank/cam inputs if they arrive sooner than expected based on the current RPM. The more aggressive the filter, the closer to the expected time the filter will operate. Higher levels of filtering may cause true pulses to be filtered out however, so it is recommended to use the lowest setting possible
It is a software filter, not really a frequency filter.
  • 1
  • 5
  • 6
  • 7
  • 8
  • 9
Knock Sensor working on Speeduino

What knock sensor are you using? The stoc[…]

CLT sensor wrong reading

Thx for quick response, ill check it other day ;[…]

Hi, the original Novitec controller was much more […]

Another type1 Beetle motor

If you have crossbar linkage, you'll need a shorte[…]

Still can't find what you're looking for?