For any add-on boards such as VR conditioners, optos and OEM interface boards
User avatar
By FilipW
#6267
I have designed a PCB, that will fit inside the plastic frame of a hammond 1455 ver2 box.

Revision 1 have the following features:
Breakout from the IDC40 header to 3 panel mount DB15 connectors.
6mm push fit Bulkhead connector, for manifold air pressure.
2 pin screwable terminal block for power.
PCB in eagle
PCB in eagle
panel_rev1.jpg (69.72 KiB) Viewed 20182 times
Received PCBs from oshpark
PCB_oshpark_comp.jpg
PCB_oshpark_comp.jpg (107.12 KiB) Viewed 19861 times
Will soon post more of assembly and the work on revision 2.
Last edited by FilipW on Sat Apr 02, 2016 7:09 am, edited 1 time in total.
User avatar
By PSIG
#6286
Image
That's great! I have a feeling this method will be popular in various versions for AMP, Deutsch, or other connectors. It would also be nice to provide for harness power (for all future Speedy versions) or a separate 2-pin bulkhead connector. Nice work!
:D
David
User avatar
By FilipW
#6298
Thanks for the encouragement! :D
Now its time for assembly of the front panel.

Mounted the DB15 connectors and crimped the flat cable to them.
6mm push fit connector mounted, with an 3/16” barb fitting for the silicone hose.
backside_panel_comp.jpg
backside_panel_comp.jpg (97.83 KiB) Viewed 19861 times
Fitted the panel inside the plastic frame and pushed it on the extruded aluminium case.
front_panel_comp.jpg
front_panel_comp.jpg (89.78 KiB) Viewed 19861 times
A look inside the case with the speeduino board inserted.
inside_case_comp.jpg
inside_case_comp.jpg (112.81 KiB) Viewed 19861 times
Everything is just test fitted, since i am working on revision 2 of the front panel.
Last edited by FilipW on Sat Apr 02, 2016 7:11 am, edited 1 time in total.
User avatar
By FilipW
#6326
Yes of course! It would be very nice to see someone more than me test the panel :)
I have drawn the board in eagle, and ordered via oshpark.

I can share the design directly through oshparks "Shared Projects" service. And I can upload the eagle .brd and .sch file here.
User avatar
By FilipW
#6331
Been working on revision 2.

Revision 2 has the same features as revision 1.
Added features is a panel mounted usb-B port for connecting to the Arduino.
panel_rev2.jpg
panel_rev2.jpg (81.28 KiB) Viewed 20055 times
I have sent an order to oshpark, so I am currently waiting for the boards to arrive.
User avatar
By FilipW
#6361
Revision 1 is now shared via oshpark, follow the link below if you would like to order your own front panel :)

Image

Important to note, you will need a hammond box which is a little bit longer than proposed in the Speeduino BOM-list. I propose the box with the dimension of 160x103x53mm.

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?