- Fri Dec 25, 2020 10:14 am
#47281
This dual VR conditioner module is a no-gimmicks representation of the MAX9926 reference circuit.
The PCB has a clean and simple quasi-one-layer layout (with only a ground plane on the back) and measures circa 20 x 20 mm.
The pinout matches the VR socket on Speeduino boards. It is very similar and functionally equivalent to a few boards out there, but doesn't provide an option for shunt resistors on the inputs (like e.g. Josh Stewart's design does).
For more information check out the GitHub repo.
The PCB has a clean and simple quasi-one-layer layout (with only a ground plane on the back) and measures circa 20 x 20 mm.
The pinout matches the VR socket on Speeduino boards. It is very similar and functionally equivalent to a few boards out there, but doesn't provide an option for shunt resistors on the inputs (like e.g. Josh Stewart's design does).
For more information check out the GitHub repo.