Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any add-on boards such as VR conditioners, optos and OEM interface boards
User avatar
By Jaap Struyk
#47201
Made an UA4C addon board that adds the 6 free analoge ports from the Mega and adds an MAP sensor replacement, feel free to (ab)use as you please...
IMG_7087.JPG
IMG_7087.JPG (2.32 MiB) Viewed 367 times
IMG_7088.JPG
IMG_7088.JPG (1.68 MiB) Viewed 367 times
inside the archive the Fritzing pcb file, a CAD drawing for the cover plate of the hammond case and a txt file with letters and numbers that mean something in the order as written down... :lol:
(50.49 KiB) Downloaded 29 times
CLT sensor wrong reading

Thx for quick response, ill check it other day ;[…]

Hi, the original Novitec controller was much more […]

What knock sensor are you using? The stock […]

Another type1 Beetle motor

If you have crossbar linkage, you'll need a shorte[…]

Still can't find what you're looking for?