For any add-on boards such as VR conditioners, optos and OEM interface boards
User avatar
By TonySandberg
#45325
Thought it was a good way to use the inputs / outputs if you do not use 4p IAC. Even if it is not possible to use the Arduino IAC pin 16,17, it is a good and smooth placement with 4 inputs 5 & 12v and gnd.
Attachments
1599857164584.jpg
1599857164584.jpg (41.65 KiB) Viewed 2311 times
IMG_20200911_203051.jpg
IMG_20200911_203051.jpg (1.24 MiB) Viewed 2311 times
1599850190772.jpg
1599850190772.jpg (28.32 KiB) Viewed 2311 times

I must have misunderstood what "after few[…]

I've been away from playing cars for a few weeks, […]

I uploaded logs and last tune and dyno plots look[…]

Hi, I am trying to assign Signed values to the x-a[…]

Still can't find what you're looking for?