For any add-on boards such as VR conditioners, optos and OEM interface boards
User avatar
By TonySandberg
#45325
Thought it was a good way to use the inputs / outputs if you do not use 4p IAC. Even if it is not possible to use the Arduino IAC pin 16,17, it is a good and smooth placement with 4 inputs 5 & 12v and gnd.
Attachments
1599857164584.jpg
1599857164584.jpg (41.65 KiB) Viewed 2310 times
IMG_20200911_203051.jpg
IMG_20200911_203051.jpg (1.24 MiB) Viewed 2310 times
1599850190772.jpg
1599850190772.jpg (28.32 KiB) Viewed 2310 times

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?