- Sun Feb 10, 2019 7:32 pm
#31979
You need a coprocessor to convert the serial from speeduino into spi for the mcp2515.
You could also use a atsamc21 these are 5v tolerant and have canfd onboard( some device versions have two canfd channels!)
I use both types in my projects and also samd51 and e51.these last two have similar specs to a t3.5/6 but at much lower cost, in fact samples can be got from microchip for free!
Check out adafruit as they have various boards with Sam MCU on them.
You could also use a atsamc21 these are 5v tolerant and have canfd onboard( some device versions have two canfd channels!)
I use both types in my projects and also samd51 and e51.these last two have similar specs to a t3.5/6 but at much lower cost, in fact samples can be got from microchip for free!
Check out adafruit as they have various boards with Sam MCU on them.
Quantum Coupe with V04 on Ford 1.4CVH,Quantum 2+2 with Custom V04 on Jaguar 3.0l AJ30 V6
mini GPIO :done More soon
CANbus broadcast interface: done
Simple sd logger :done
External CAN io: Inputs :done
Gearbox controller: working
mini GPIO :done More soon
CANbus broadcast interface: done
Simple sd logger :done
External CAN io: Inputs :done
Gearbox controller: working