[NickZ]

Speeduino Wireless gauge prototype.
Still writing firmware for it, but will have multi screens with different selectable gauges.
Uses Bluetooth
Rechargeable 18650 with charge circuit, Chargeable buy usb or can be used with USB
Small compact size as you can see by the 18650 battery.
https://youtu.be/Xu-Q0mhVWDM

[dazq]

Speeduino Wireless gauge prototype.
Still writing firmware for it, but will have multi screens with different selectable gauges.
Uses Bluetooth
Rechargeable 18650 with charge circuit, Chargeable buy usb or can be used with USB
Small compact size as you can see by the 18650 battery.
https://youtu.be/Xu-Q0mhVWDM

Cool , like this!
I assume it pulling the data over the Bluetooth from secondary serial?
I just put in a feature request to look at getting full tuning ability added to the secondary serial, though I'm sure tuning is not what you intended this for Im sure you have other devices that would benefit.

[NickZ]

yes serial 2 on the teensy, id been waiting for my revision of my board as i have moved the serial from 1 to 2.

Did you looking into those Openlog Serial Data Logger? Id love to add one to this, I know it saves all the serial data. But how can we use it?

[NickZ]

PCB sent for fabrication.

Frontboard.jpg (67.25 KiB) Viewed 7394 times

backboard.jpg (60.56 KiB) Viewed 7394 times

[NickZ]

20190203_140440.jpg (116.96 KiB) Viewed 7195 times

20190203_120206.jpg (135.93 KiB) Viewed 7195 times

20190203_120154.jpg (239.57 KiB) Viewed 7195 times

20190202_113552.jpg (198.52 KiB) Viewed 7195 times

20190202_113538.jpg (152.08 KiB) Viewed 7195 times

They have arrived, just making a case for them and finding a slim 3.7v battery.

[digmorepaka]

Got the source files for this up somewhere? Thanks!

[NickZ]

no, its evolved to a round gauge with neo pixles.
https://www.youtube.com/watch?v=OyQ633YC8IE&ab_channel=NickHay
But im still working on Firmware for it.

[digmorepaka]

no, its evolved to a round gauge with neo pixles.
https://www.youtube.com/watch?v=OyQ633YC8IE&ab_channel=NickHay
But im still working on Firmware for it.

Looks awesome! I would highly appreciate it if you could share the sources for it(pcb code etc) even in it's unfinished state if you're comfortable with doing so. I'd like to build my own, and the functionality shown is already a lot.