Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any add-on boards such as VR conditioners, optos and OEM interface boards
By NickZ
#31165
Speeduino Wireless gauge prototype.
Still writing firmware for it, but will have multi screens with different selectable gauges.
Uses Bluetooth
Rechargeable 18650 with charge circuit, Chargeable buy usb or can be used with USB
Small compact size as you can see by the 18650 battery.
https://youtu.be/Xu-Q0mhVWDM
By dazq
#31170
NickZ wrote:
Fri Jan 11, 2019 9:54 pm
Speeduino Wireless gauge prototype.
Still writing firmware for it, but will have multi screens with different selectable gauges.
Uses Bluetooth
Rechargeable 18650 with charge circuit, Chargeable buy usb or can be used with USB
Small compact size as you can see by the 18650 battery.
https://youtu.be/Xu-Q0mhVWDM
Cool , like this!
I assume it pulling the data over the Bluetooth from secondary serial?
I just put in a feature request to look at getting full tuning ability added to the secondary serial, though I'm sure tuning is not what you intended this for Im sure you have other devices that would benefit.
By NickZ
#31176
yes serial 2 on the teensy, id been waiting for my revision of my board as i have moved the serial from 1 to 2.

Did you looking into those Openlog Serial Data Logger? Id love to add one to this, I know it saves all the serial data. But how can we use it?
By NickZ
#31220
PCB sent for fabrication.
Frontboard.jpg
Frontboard.jpg (67.25 KiB) Viewed 2625 times
backboard.jpg
backboard.jpg (60.56 KiB) Viewed 2625 times
By NickZ
#31778
20190203_140440.jpg
20190203_140440.jpg (116.96 KiB) Viewed 2426 times
20190203_120206.jpg
20190203_120206.jpg (135.93 KiB) Viewed 2426 times
20190203_120154.jpg
20190203_120154.jpg (239.57 KiB) Viewed 2426 times
20190202_113552.jpg
20190202_113552.jpg (198.52 KiB) Viewed 2426 times
20190202_113538.jpg
20190202_113538.jpg (152.08 KiB) Viewed 2426 times
They have arrived, just making a case for them and finding a slim 3.7v battery.
By digmorepaka
#46694
NickZ wrote:
Thu Nov 26, 2020 10:59 am
no, its evolved to a round gauge with neo pixles.
https://www.youtube.com/watch?v=OyQ633YC8IE&ab_channel=NickHay
But im still working on Firmware for it.
Looks awesome! I would highly appreciate it if you could share the sources for it(pcb code etc) even in it's unfinished state if you're comfortable with doing so. I'd like to build my own, and the functionality shown is already a lot.
Back feeding usb

Just curious has anybody had any problems powering[…]

Guess I got more done than I expected I would toda[…]

MX-5 (Miata) NB8A Mk2 99-00

There is no knock support. What are pins 1, 2, 3,[…]

Well it's not going to work unless you confirm tim[…]

Still can't find what you're looking for?