Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any add-on boards such as VR conditioners, optos and OEM interface boards
By dazq
#30023
dvjcodec wrote:
Sun Nov 04, 2018 8:28 am
Soldered with soldering iron, but hotgun needed too.

07.11.2018

Almost everything works prop, except one selenoids output. I don't know what is wrong, because wiring OK between MCU's leg and octocoupler. No output signal on MCU's leg.

https://drive.google.com/file/d/1zeBsqb ... sp=sharing
Which MCU pin is it that's not working?
Can you post the test code?
#30024
int led = 19; //speed1
int led2 = 18; //speed2
int led3 = 24; //speed3
int led4 = 35; //selenoid1
int led5 = 37; //selenoid2
int led6 = 41; //selenoid3
int led7 = 43; //selenoid4
int led8 = 39; //selenoid5
int led9 = 29; //selenoid6
int led10 = 31; //selenoid7
int led11 = 33; //selenoid8
int led12 = 2; //MCP int
int led13 = 0; //
int led14 = 0; //
int led15 = 0; //
int led16 = 0; //
int led17 = 0; //
int led18 = 0; //
int led19 = 0; //



void setup() {
// initialize the digital pin as an output.
pinMode(led, OUTPUT);
pinMode(led2, OUTPUT);
pinMode(led3, OUTPUT);
pinMode(led4, OUTPUT);
pinMode(led5, OUTPUT);
pinMode(led6, OUTPUT);
pinMode(led7, OUTPUT);
pinMode(led8, OUTPUT);
pinMode(led9, OUTPUT);
pinMode(led10, OUTPUT);
pinMode(led11, OUTPUT);
pinMode(led12, OUTPUT);
pinMode(led13, OUTPUT);
pinMode(led14, OUTPUT);
pinMode(led15, OUTPUT);
pinMode(led16, OUTPUT);
pinMode(led17, OUTPUT);
pinMode(led18, OUTPUT);
pinMode(led19, OUTPUT);
}

void loop()
{digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level)
delay(50); // wait for a second
digitalWrite(led, LOW); // turn the LED off by making the voltage LOW
delay(50); // wait for a second

{digitalWrite(led2, HIGH);
delay(50);
digitalWrite(led2, LOW);
delay(50);}

{digitalWrite(led3, HIGH);
delay(50);
digitalWrite(led3, LOW);
delay(50);}

{digitalWrite(led4, HIGH);
delay(50);
digitalWrite(led4, LOW);
delay(50);}

{digitalWrite(led5, HIGH);
delay(50);
digitalWrite(led5, LOW);
delay(50);}

{digitalWrite(led6, HIGH);
delay(50);
digitalWrite(led6, LOW);
delay(50);}

{digitalWrite(led7, HIGH);
delay(50);
digitalWrite(led7, LOW);
delay(50);}

{digitalWrite(led8, HIGH);
delay(50);
digitalWrite(led8, LOW);
delay(50);}

{digitalWrite(led9, HIGH);
delay(50);
digitalWrite(led9, LOW);
delay(50);}

{digitalWrite(led10, HIGH);
delay(50);
digitalWrite(led10, LOW);
delay(50);}

{digitalWrite(led11, HIGH);
delay(50);
digitalWrite(led11, LOW);
delay(50);}

{digitalWrite(led12, HIGH);
delay(50);
digitalWrite(led12, LOW);
delay(50);}

{digitalWrite(led13, HIGH);
delay(50);
digitalWrite(led13, LOW);
delay(50);}

{digitalWrite(led14, HIGH);
delay(50);
digitalWrite(led14, LOW);
delay(50);}

{digitalWrite(led15, HIGH);
delay(50);
digitalWrite(led15, LOW);
delay(50);}

{digitalWrite(led16, HIGH);
delay(50);
digitalWrite(led16, LOW);
delay(50);}

{digitalWrite(led17, HIGH);
delay(50);
digitalWrite(led17, LOW);
delay(50);}

{digitalWrite(led18, HIGH);
delay(50);
digitalWrite(led18, LOW);
delay(50);}

{digitalWrite(led19, HIGH);
delay(50);
digitalWrite(led19, LOW);
delay(50);}

}
#31975
If U looking for controller designed for 722.6 transmission, with all features (automatic shifting, manual shifting etc.) i have different controller. Please contact on PM
Attachments
3.jpg
3.jpg (735.05 KiB) Viewed 2947 times
2.jpg
2.jpg (736.31 KiB) Viewed 2947 times
1.jpg
1.jpg (537.05 KiB) Viewed 2947 times
  • 1
  • 8
  • 9
  • 10
  • 11
  • 12
  • 14

Sharing of tunes is NOT recommended. Different fi[…]

Trigger wheel setup help please

Wire it for semi-sequential. That way if you add […]

36-3 (ish) trigger wheel

Thanks again.

1.4 T-jet Centos

... It is a little bit arrogant to expect a Spee[…]

Still can't find what you're looking for?